New Accessory Spike and Suction Cup Feet by Manfrotto

Standard

New Accessory Spike and Suction Cup Feet by Manfrotto

Accessory Spike feet

Spike Feet

The Manfrotto accessory spike and suction cup feet is a useful adaptation for your tripod.  The spikes are useful for digging in to semisoft ground or sand and gravel.  The metal spikes are retractable with a large rubber foot the screws down over top allowing you to still use the foot on standard floors without worrying about scratches.  The  suction cups are usually used with sand and snow, but they are also great on tile or marble floors so the video tripod doesn’t move when you pan the head back and forth.

Suction cup feet

Accessory Suction Cup Feet

All of these feet attach by removing the old rubber foot and clamping this foot to the outside of the tube.  It is a simple operation.  May sure you measure the outside diameter of the bottom leg tube on your tripod. Pick the foot that is closest to the diameter of you tube.  The clamps are secure, but you cannot over clamp these feet to make us the difference otherwise you will brad the clamp.  It is especially important that you not over tighten the clamps on carbon fiber tripods. While very strong, too much pressure can crack and split the tube.

The descriptions are hyper linked, so you can click on any of them and be directed to the order page.

Spike Feet

12SPK3 is 12mm in diameter and is compatible with the MK293A4, MT293A4, MKBFRA4 tripods and kits.

15SPK3 is 15mm in diameter and is compatible with the MK293A3, MT293A3, MK294A4, MT294A4, MK190XPRO4, MT190XPRO4

19SPK3 is 19mm in diameter and is compatible with the MK294A3, MT294A3, MK190XPRO3, MT190XPRO3

22SPK3 is 22mm in diameter and is compatible with the MT055CXPRO3

These are the older series of spike feet that are compatible with Manfrotto and the much older Bogen tripods.
116SPK3 is 11.6mm in diameter and is compatible with the MK190XPRO3, MT190XPRO3

160SPK3 is 16mm in diameter and is compatible with the MT055CXPRO4, MT190CXPRO3

204SPK3 is 20.4mm in diameter and is compatible with the  MT055CXPRO3

Suction Cup Feet (we currently only stock one ((we don’t get much ice)))

12SCK3 is12mm in diameter and is with the MK293A4, MT293A4, MKBFRA4

15SCK3 is 15mm in diameter and is compatible with the MK293A3, MT293A3, MK294A4, MT294A4, MK190XPRO4, MT190XPRO4

19SCK3 is 19mm in diameter and is compatible with the MK294A3, MT294A3, MK190XPRO3, MT190XPRO3

22SCK3 is 22mm in diameter and is compatible with the MK055CXPRO3, MT055CXPRO3

116SCK1 is 11.6mm in diameter and is compatible with the MT190XPRO4

160SCK3 is 16mm in diameter and is compatible with the MT055CXPRO4, MT190CXPRO3

204SCK3 is 20.4mm in diameter and is compatible with the MT055CXPRO3

If you are having problems, or for a tune up or for repairs, send your name, address, daytime phone and email address along with your tripod to:

ManfrottoTripodParts.com Repairs
c/o SpartanPhotoCenter
108 Garner Road
Spartanburg, SC 29303

Once we have it, we will evaluate it and contact you. Please send us your daytime phone so we can reach you during business hours.

Lastly, if we are repairing your Manfrotto Product; we are recycling all broken parts and scrap articles. Almost nothing goes into the trash if we can help it.

 

Advertisements