What is the difference between the Manfrotto MT190GO tripods?

Standard

MT190GOcomparison

I see there is an MT190GOA4 and a MT190GOA4TB so what is the difference between these two?  They look the same.

There have been three versions of MT190GO in aluminum and 2 in carbon since it came out in 2015. And other than the “TIPA” award sticker on the new one, they look almost identical.  The specifications have not changed.  They are the same size,weight and capacity.  But if you are looking for parts your are going to fin three versions right now: MT190GOA4TB-1MT190GOA4TB-2MT190GOA4.

I’m going to tackle these in order of appearance: MT190GOA4TB-1  was introduced 2015-02-10 and it had a TB and a TD version.  The TB is the black leg release button, the TD is the grey leg release button.  These are the same units, except for that.  The legs are sold as single parts, there is not sub-parts like bushings or twist knobs on this model.

Next in 2016-02-22 was the MT190GOA4TB-2 which is again identical, except that the leg assemblies were given different parts number.  These are the same units, except for that.  The legs are sold as single parts, there is not sub-parts like bushings or twist knobs on this model.

MT190GOtwistcomparison

The latest version  MT190GOA4 was introduced 2017-05-15 is almost a completely different tripod.  The size, weight and capacity are identical.  But now, there are individual parts that make up the legs.  This is great!  You can replace the leg shims as they wear.  Now this is where it gets interesting:  The legs are no longer round tubes, they are D shaped.  There is a little flat on the inside of the tube. This makes the tube stronger, and although the tubes are still the same diameter, the twist lock knobs are “chunkier” on the newer unit, making for a better grip.  These twist lock knobs are available in single or three packs as well.  The old twist knobs are not compatible with the new, so you can’t but the knobs and replace them on the old units.  The newer knobs are officially the new M series twist knobs and the engineering is better than before.

MT190GOfeetAnother difference is the feet.  The new MT190GO use push in rubber feet, while the older MT190GO used a screw in foot.  Not a huge difference, but you can see that it makes for a more stable foot.  The one of the left is the newer tripod and the foot is angled for better grip.

Be aware that these differences also translated into the carbon fiber version MT190GOC4TB and MT190GOC4 as well.  And, as is the case, many of the parts for the aluminum tripods do not fit the carbon tripods.  About the only that that does is the center column and the top and bottom plates of the main castings.  So make sure you know which tripod you have before ordering the parts.

As always, if you need help we are always happy to lend a hand.  Bas is available from 10 am to 2 pm Monday through Friday and we can take you emails and calls.  You can call us at 864-583-6835.  If you would rather not deal with it you can always send it to:

Manfrotto Repairs
c/o SpartanPhotoCenter, inc
108 Garner Road
Spartanburg, SC 29303

 

What is the hole in the side of my old Manfrotto 055 tripod?

Standard

 

055AccessoryPort

I’ve always seen that hole, like there was something missing.  What is it? What goes in the hold? Am I missing a part?

This is the accessory port on the old Manfrotto and Bogen tripods.  It was designed to take a 3/8 screw, like what is on many of the accessory arms and heads.  It is also where you can put the strap lanyard.  Part R055,349 is a screw in with a metal loop.  This can be used for multiple things, most commonly attaching a strap or a carabiner to hang you

244Micro-AR

camera bag.  This screw port was found on all the 055 and 190 tripods.  This is similar to the accessory part on the new MT190 and MT055; which has an anti twist feature when use with the Manfrotto mini arms.  This new mini arm can fit in some of the old tripods, but like the picture above the hole placement is the limiting factor.  If your hole is on the side of the main casting,. then you can use it or if you have any of the new Manfrotto MT190, MT055, MT290’s then you are guaranteed a fit.  There are a bunch of accessories that go with these arms, you can find that page here.