Discontinued Part: R190,311 locking knob

Standard

\MainposMAIN POS (E)DataPictures in POS3667.jpgManfrotto has discontinued the part R190,311.  This was a common center column locking knob for many Manfrotto and Bogen older style 190 tripods. You can use the following:

R190,41 is a similar replacement, it has a spring and the diameter and thread size is the same. Click here for more info.

R004,80 is the correct diameter and size, but there is no spring. Click here for more info.

 

Are Leg Tubes Interchangeable?

Standard

dsc_0611-e1500994069275.jpgI bent a leg tube, so now I cannot retract my leg.  Does it matter what tube I replace it with?

The tubes are all different sizes since they have to fit into each other.  So one difference is the tube diameter.

The second is the interior shape.  Some tubes are smooth inside, others have ridges that tit into grooves so the tubes will not rotate.  The tube in the center of the picture is “D” shaped and will not work with the round tubes, or the leg braces and leg locks.  The tubes are different lengths depending upon whether the tripod is a 3 section or a 4 section.

And the last consideration is color.  In the older tripods the tubes can be silver or black.  In the same model they are interchangeable, so as long a you can live with the color difference, these are interchangeable.

Ultimately the best thing to do it find the exact model and purchase the tubes for it.  If you cannot determine what you have, send it to us.

Spartan Photo Center, Inc
108 Garner Road
Spartanburg, SC 29303

Include your Name, Address, Day time or cell phone number, and a description of what is damaged or needs to be repaired inside the box. Because of parts availability, or lack there of, we cannot guarantee rush service or turnaround times.

Some repairs can only be preformed by the Manfrotto repair technicians, and may have to be sent to a Manfrotto repair facility. Any items not listed on this site will be sent to Manfrotto. Repairs are usually quoted for complex or highly technical repairs.

How to change a head on your tripod.

Standard

055 tripod

One of the simpler modifications you can make to your Manfrotto tripod is changing the head.  While you may be able to get by with only one head, having several for different situations will make you life easier.

 

Mt tripod

All Manfrotto, and Bogen, tripods that have center columns will allow you to lock the head so it does not unscrew during use.  The older tripods had up to 3 locking screws, we call them “grub screws,” while the newer tripods may only have one.  The grub screw is used to put tension on the head when it is screwed on, so it will not come off.  Indeed, if you have ever attempted to remove a head while the grub screws were tightened you could more easily destroy the head than unscrew it.

You don’t even need to remove the grub screw. Just backing the screw out enough to allow the head to unscrew is all that it takes.   The grub screws are accessed from the bottom of the center column plate or to the side of the plate. Just make sure they are backed out completely before you reattach the head, because the stability of the head depends upon the base of the head and the center column plate both being in good contact with each other.

 

If even one grub screw protruded it will prevent the head from staying locked and it may wiggle or unscrew during use.  The picture to the right is a head that never stayed on tight.  the customer sent this in for repair when it was only a grub screw that was causing the problem.  Backing out the grub screw, re tightening the head and re tightening the grub screw was all it took.

We often find on the really old Bogen tripods that the head and the center column plate might get stuck after years of being together.  Sometimes this is the aluminum wanting to bond, often its is corrosion or foreign contaminants.  Either way if you cannot unlock it, we can.

There are different grub screws for different series and models of tripods and center columns.  The old Bogen 190, 055 use three grub screws,  the Manfrotto MT190, Mt055 and MT290 tripods use a single grub screw and the 055 and 190 leveling columns use a single grub screw that accesses from the side.  The video balls also have grubs screws, found here.

If you are having problems determining parts needed, or for a tune up or for repairs, send your name, address, daytime phone and email address along with your tripod to:

ManfrottoTripodParts.com Repairs
c/o SpartanPhotoCenter
108 Garner Road
Spartanburg, SC 29303

Once we have it, we will evaluate it and contact you. Please send us your daytime phone so we can reach you during business hours.

Lastly, if we are repairing your Manfrotto Product; we are recycling all broken parts and scrap articles. Almost nothing goes into the trash if we can help it.

Are Bogen and Manfrotto Tripods the Same?

Standard

Old055TopYes, 20 years or so ago, Bogen tripods were made by Manfrotto.

And…

No, the current Manfrotto Tripods are very different in most cases from what the Bogen equivalent used to be called.

MTtripod above

As you can see from the 3021/055 picture to the left, this Bogen tripod is bulkier and more angular.  The MT055 Manfrotto tripod to the right is the same series tripod, though it is made about 20 years later and it is much more stylish.

One of the major changes between the two brands, though they shared models like 055, 058, 190 etc; is generally the weight.  The newer Manfrotto tripods a very much lighter than the previous models. The old Bogen 055/3021 weighs about 6.6 lbs; while the new Manfrotto MT055XPRO3 only weighs 5.5 lbs.  The old Bogens usually used round tubes, where most of the new Manfrotto tripods have “D” shaped tubes that are lighter and just as strong as the older heavier ones.

Also the use of “technopolymer” is allowing the weight on bulky parts to be reduced.  You will find this on the newer heads.

By using newer technologies and better allows the size and strength remain the same while the weight is decreased overall. This technology is being diffused across all the tripods, heads, and monopods.

 

If you are having problems determining what parts you need, or for a tune up or for repairs, send your name, address, daytime phone and email address along with your tripod to:

ManfrottoTripodParts.com Repairs
c/o SpartanPhotoCenter
108 Garner Road
Spartanburg, SC 29303

Once we have it, we will evaluate it and contact you. Please send us your daytime phone so we can reach you during business hours.

Lastly, if we are repairing your Manfrotto Product; we are recycling all broken parts and scrap articles. Almost nothing goes into the trash if we can help it.

 

 

How Do I Replace The Leg on an 190?

Standard
055 Leg Brace

New MT190 Leg Brace

Replacing the leg on any of the 190 series Manfrotto tripods is very easy.  The problem is where the damage is located a190tripodAboveAdjustnd how much you have to fix it.

 

If the upper part of the leg is damaged you can remove the whole leg just by loosening the leg tension screw or screws on the main casting.  On some legs the main brace is made onto the leg tube, so they are one assembly and you replace the top section completely. Replace the lower parts as needed and re assemble.

If the upper tube leg is damaged and the tube and brave are two parts, you just need to loosen the screws holding the tube.  Once this is loosened the leg will pull out of the brace.  This may be difficult.  DO NOT use a metal hammer to tap on any of the parts.  The metal on metal will deform or damage the parts.  You can repair the parts of the leg as needed and reinsert into the leg brace.  Use enough pressure as required, but to not hammer into place.

Leg tubes are very specific in diameter and length.  So we will have to know model number and diameter and length to get the right part.  Some of the older tripods had several versions that are not marked on the parts lists.

Old 055 Leg Brace Adjustment

Old 3011 Leg Brace Adjustment

If the leg brace is damaged, you will need to take apart the main casting that hold the legs to the tripod.  This will vary depending upon which 190 you are repairing.  The following shows the old 190 (also called a Bogen 3001) and the newer 190XDB.

Both series of 190 tripods have screws that hold the halves of the main casting together..

If you are having problems, or for a tune up or for repairs, send your name, address, daytime phone and email address along with your tripod to:

ManfrottoTripodParts.com Repairs
c/o SpartanPhotoCenter
108 Garner Road
Spartanburg, SC 29303

Once we have it, we will evaluate it and contact you. Please send us your daytime phone so we can reach you during business hours.

Lastly, if we are repairing your Manfrotto Product; we are recycling all broken parts and scrap articles. Almost nothing goes into the trash if we can help it.

Are leg locks interchangeable on Bogen 3021 and 3011 tripods?

Standard

I have an old 055 tripod that has screws to lock the legs.  Can I switch  out the old leg locks for new ones with snap levers?

Yes you can, IF you make sure the inside diameter of the new locks are the same as the old locks.  So if you are changing the old 055 for a new 055x series clamp, there is very little difference.  In fact we recommend these (click here for upper) for the upper clamp and (click here for the lower) lower leg clamps.

Leg clamps come in all sizes

Leg clamps come in all sizes

These are using the newer snap lock.  These have a very easy snap open and closed lock with a positive feel.  You know when these are locked.

Also, bear in mind that Manfrotto (more than 20 years ago it was called Bogen) has been making tripods for over 40 years.  The older tripods are not necessarily the same as the new ones.  Manfrotto has been make the 190 and 055 series for all of that time.  The newest versions are not called the MT190, and none of the old repair parts will work with the new tripods.

Replacing all the upper and lower locks could be more expensive that the tripod is actually worth.  This is a concern for obvious reasons, however we can help with several suggestions.  First, you could trade in your old tripod for a newer one.  Or secondly you can send us your used parts.  We will pay for the used parts, depending upon condition and function.

If you are having problems, or for a tune up or for repairs, send your name, address, daytime phone and email address along with your tripod to:

ManfrottoTripodParts.com Repairs
c/o SpartanPhotoCenter
108 Garner Road
Spartanburg, SC 29303

Once we have it, we will evaluate it and contact you. Please send us your daytime phone so we can reach you during business hours.

Lastly, if we are repairing your Manfrotto Product; we are recycling all broken parts and scrap articles. Almost nothing goes into the trash if we can help it.